LVDS晶振,LVDS输出,156.25M晶振

当前位置：首页 » 爱普生晶振 » 爱普生 LVDS晶振

: 爱普生晶振,声表面波振荡器,XG-2102CA L晶振,X1M0003410007晶振频率：100 MHz - 700 MHz尺寸：7.0 × 5.0 × 1.2 mm

小型贴片石英晶振,外观尺寸具有薄型表面贴片型石英晶体谐振器,特别适用于有小型化要求的市场领域,比如智能手机,无线蓝牙,平板电脑等电子数码产品.晶振本身超小型,薄型,重量轻,晶体具有优良的耐环境特性,如耐热性,耐冲击性,在办公自动化,家电相关电器领域及Bluetooth,Wireless LAN等短距离无线通信领域可发挥优良的电气特性,满足无铅焊接的回流温度曲线要求.

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,XG-2121CA L晶振,高频SMD型6脚LVDS晶振频率：100 MHz - 700 MHz尺寸：7.0 × 5.0 × 1.2 mm

爱普生晶振,贴片晶振,XG-2121CA L晶振,高频SMD型6脚LVDS晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LVDS

频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V -+0.125V

外部尺寸规格: 7.0 × 5.0 × 1.2 mm

功能：使能（OE）

工作温度范围: P:0°C - +70°C ,R:-5°C - +85°C ,S:-20°C - +70°C

SAW 单元极低的抖动振荡器

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-4101CA晶振,LV-PECL输出晶振频率：100 MHz - 700 MHz尺寸：7.0 × 5.0 × 1.2 mm

爱普生晶振,贴片晶振,EG-4101CA晶振,LV-PECL输出晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS, HCSL

频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V EG-4121CA； 3.3 V EG-4101CA

输出: LV-PECL / LVDS / HCSL

外部尺寸规格: 7.0 × 5.0 × 1.2 mm

SAW 单元极低的抖动振荡器

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-4121CA晶振,HCSL输出晶振频率：100 MHz - 700 MHz尺寸：7.0 × 5.0 × 1.2 mm

爱普生晶振,贴片晶振,EG-4121CA晶振,HCSL输出晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS, HCSL

频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V EG-4121CA； 3.3 V EG-4101CA

输出: LV-PECL / LVDS / HCSL

外部尺寸规格: 7.0 × 5.0 × 1.2 mm

SAW 单元极低的抖动振荡器

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-2103CB晶振,5032差分晶振频率：100 MHz - 700 MHz尺寸：5.0 × 3.2 × 1.4 mm

爱普生晶振,贴片晶振,EG-2103CB晶振,5032差分晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS

高温环境对应 ?频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V EG-2123CB；3.3 V EG-2103CB

外部尺寸规格: 5.0 × 3.2 × 1.4 mm

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-2123CB晶振,SPSO晶振频率：100 MHz - 700 MHz尺寸：5.0 × 3.2 × 1.4 mm

爱普生晶振,贴片晶振,EG-2123CB晶振,SPSO晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS

高温环境对应 ?频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V EG-2123CB；3.3 V EG-2103CB

外部尺寸规格: 5.0 × 3.2 × 1.4 mm

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-2102CB晶振,EG-2102CB 133.0000M-PGPAL3晶振频率：100 MHz - 700 MHz尺寸：5.0 × 3.2 × 1.4 mm

爱普生晶振,贴片晶振,EG-2102CB晶振,EG-2102CB 133.0000M-PGPAL3晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS

频率范围: 100 MHz - 700 MHz

电源电压: 2.5 V EG-2121CB；3.3 V EG-2102CB

输出: LV-PECL 或LVDS 功能: 使能(OE)

外部尺寸规格: 5.0 × 3.2 × 1.4 mm

SAW 单元的极低抖动振荡器

相关产品说明下载PDF文件

: 爱普生晶振,贴片晶振,EG-2121CB晶振,EG-2121CB 156.2500M-PGSNL3晶振频率：100 MHz - 700 MHz尺寸：5.0 × 3.2 × 1.4 mm

爱普生晶振,贴片晶振,EG-2121CB晶振,EG-2121CB 156.2500M-PGSNL3晶振

低抖动表面声波(SAW)振荡器 (SPSO) 输出:LV-PECL, LVDS

频率范围: 100 MHz - 700 MHz ?

电源电压: 2.5 V ??? EG-2121CB；3.3 V ??? EG-2102CB

输出: LV-PECL 或LVDS ?功能: 使能(OE)

外部尺寸规格: 5.0 × 3.2 × 1.4 mm

SAW 单元的极低抖动振荡器

相关产品说明下载PDF文件

Recommended News

爱普生晶振新推出差分输出晶体振荡器: 爱普生晶振新推出差分输出晶体振荡器

日本精工爱普生晶振公司成立于1942年5月,迄今为止已经成了晶振行业较出名的进口晶振品牌,日本爱普生晶振,KDS大真空晶振,SEIKO精工晶振,KYOCERA晶振,NDK晶振均是日系较大晶振品牌供应商.市场竞争力比较大,各大进口晶振品牌制造商也不断的研发生产新产品.

Japan Seiko Epson Crystal Co., Ltd. was established in May 1942. So far, it has become a well-known imported crystal brand in the crystal industry. Japan Epson crystal oscillator, KDS large vacuum crystal oscillator,Seiko crystaloscillator, KYOCERA crystal oscillator, NDK crystal oscillator are Japanese large crystal oscillators. Brand suppliers. The market competitiveness is relatively large, and the major imported crystal brand manufacturers are constantly developing and producing new products.

就在2014年3月26日,爱普生晶振公司推出SG7050EBN晶振.这款石英晶体振荡器型号是下一代的差分输出晶振(差分信号手于高频时钟和数据信号,以实现良好的信号完整性和高抗噪性.如:高精度,高温度,低抖动,低功耗).可实现极低的相位抖动(时钟周期之前的波动,这可能导致数据传输期间的们错误).

On March 26, 2014, Epson Crystal Corporation introduced the SG7050EBN crystal. This quartz crystal oscillator model is the next generation of differential output crystal (differential signal hands on high frequency clock and data signals for good signal integrity and High noise immunity. For example: high precision, high temperature, low jitter, low power consumption. It can achieve extremely low phase jitter (fluctuations before the clock cycle, which may cause errors during data transmission).

SG7050EBN晶振的频率范围在100~175MHZ之间,可以实现65fs的相位抖动.些性能适用于数据中心和中心局使用的1040和100千兆位以太网互连.SG7050EBN晶振将用于有线网络设备使用,包括运营商和企业,如高端路由器和交换机.

The SG7050EBN crystal has a frequency range of 100 to 175 MHz and can achieve phase jitter of 65 fs. These features are suitable for 1040 and 100 Gigabit Ethernet interconnections used in data centers and central offices. The SG7050EBN crystal oscillator will be used for wired network equipment. , including operators and enterprises, such as high-end routers and switches.

SG7050EBN采用专为低噪声设计的振荡器IC和采用爱普生专用QMEMS(QMEMS结合了”石英”,一种具有出色稳定性和精度的压电晶体材料,以采用微制造技术设计的”MEMS”微机系统.结合了MEMS技术的优势和石英材料的基本优势.也是精工爱普生晶振公司注册的商标)工艺制造的高频基波(HFF)AT切晶体(HFF晶体单元是通过光刻工艺蚀刻成倒置台面形状并以高基频振荡的晶体芯片).实现65fs相位抖动.爱普生的HFF晶体技术比传统的三次谐波晶体更加可靠.爱普生晶振公司后续也打算通过逐步发布支持HCSL和LVDS输出标准的新产品来解决网络设备中使用的各种差分输出格式.EPSON晶振致力于提高客户的设计自由度,采用高度紧凑的5032(5.0*3.2*1.0mm)封装.

The SG7050EBN uses an oscillator IC designed for low noise and a QMEMS (QMEMS combined with quartz), a piezoelectric crystal material with excellent stability and precision, and a "MEMS" microcomputer system designed with micro-fabrication technology. Combines the advantages of MEMS technology with the basic advantages of quartz materials. It is also a trademark of Seiko Epson Crystal Co., Ltd.) Processed high-frequency fundamental (HFF) AT-cut crystal (HFF crystal unit is etched into an inverted mesa shape by photolithography and High-frequency oscillation crystal chip). Realize 65fs phase jitter. Epson's HFF crystal technology is more reliable than traditional third-harmonic crystal. Epson Crystal's follow-up is also intended to solve network equipment by gradually releasing new products supporting HCSL and LVDS standards. Various differential output formats used in the EPSON crystal oscillator are dedicated to improving the customer's design freedom in a highly compact 5032 (5.0*3.2*1.0mm) package.
【更多详情】